86exporter.com
Home
Products Catalog
Suppliers Catalog
Log In
Sign up
About Us
Profile
Products
Contact Us
LUQUAN ZHANDAO QIAOXI MALLEABLE IRON PIPE FITTINGS CO., LTD
Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]
1
high quality malleable iron pipe fitting drinking nipple
Specification: 1/2"-6"
Detail: Tensile strength is 330N/mm, Working pressure is 1.6***, Elongation is 10%, Test pressure is 2.4***, Hardness is HB180, Working Temperature: -20 to 300 degree.
2
high quality malleable iron pipe fitting elbow 45 degree
Specification: 1/2"-6"
Detail: Tensile strength is 330N/mm, Working pressure is 1.6***, Elongation is 10%, Test pressure is 2.4***, Hardness is HB180, Working Temperature: -20 to 300 degree.
3
high quality malleable iron pipe fitting cross tee
Specification: 1/8"-2"
Detail: Tensile strength is 330N/mm, Working pressure is 1.6***, Elongation is 10%, Test pressure is 2.4***, Hardness is HB180, Working Temperature: -20 to 300 degree.
4
high quality malleable iron pipe fitting plug beaded
Specification: 1/8"-2"
Detail: Tensile strength is 330N/mm, Working pressure is 1.6***, Elongation is 10%, Test pressure is 2.4***, Hardness is HB180, Working Temperature: -20 to 300 degree.
5
high quality malleable iron pipe fitting elbow
Specification: 1/2
Detail: Tensile strength is 330N/mm, Working pressure is 1.6***, Elongation is 10%, Test pressure is 2.4***, Hardness is HB180, Working Temperature: -20 to 300 degree.
6
high quality malleable iron pipe fitting conical union
Specification: 1/2
Detail: Tensile strength is 330N/mm, Working pressure is 1.6***, Elongation is 10%, Test pressure is 2.4***, Hardness is HB180, Working Temperature: -20 to 300 degree.
7
high quality malleable iron pipe fitting nipple
Specification: 1/2"-6" DIN, BS, ANSI standard
Detail: Tensile strength is 330N/mm, Working pressure is 1.6***, Elongation is 10%, Test pressure is 2.4***, Hardness is HB180, Working Temperature: -20 to 300 degree.
8
hot dipped galvanized cast iron socket
Specification: 1/8"-2"
Detail: Tensile strength is 330N/mm, Working pressure is 1.6***, Elongation is 10%, Test pressure is 2.4***, Hardness is HB180, Working Temperature: -20 to 300 degree.
9
hot dipped galvanized cast iron tee
Specification: 1/8"-6"
Detail: Tensile strength is 330N/mm, Working pressure is 1.6***, Elongation is 10%, Test pressure is 2.4***, Hardness is HB180, Working Temperature: -20 to 300 degree.
10
mallable iron pipe fitting
Specification: BS, DIN, ANSI
Detail: Tensile strength is 330N/mm, Working pressure is 1.6***, Elongation is 10%, Test pressure is 2.4***, Hardness is HB180, Working Temperature: -20 to 300 degree.
Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]
1
Copyright© LUQUAN ZHANDAO QIAOXI MALLEABLE IRON PIPE FITTINGS CO., LTD All Rights Reserved.
Tel : 008613383016313 Fax : 008631187873733
Powered by
86exporter.com